High lift capacity trailer from Talbert

Talbert Manufacturing, a leader in the specialty-built trailer and
transport system industry, has launched its 50CC/RP hybrid trailer.
Combining the benefits of a close couple lowbed design with a roller
paver model, the 50CC/RP offers a longer loading incline and
best-in-class lift capacity of any trailer on the market. This allows
the hybrid trailer to haul a greater range of equipment, from loaders
and excavators to rollers and pavers. Additionally, the specialty design
provides versatility for a larger audience of contractors including
general construction, grading, excavation and pavement.

With a deck length of 26 feet, the new 50CC/RP offers the space for full
construction fleet loads, while also featuring a specially-designed
slope to allow easy transport of rollers and pavers. The design slopes
from the bottom up to create a more moderate incline over a greater
distance, approximately a third of the deck length. Finish height at the
front of the main beams is 8 3/4 inches. Additionally, the trailer
features a bolt-on ramp to provide a more gradual load angle at the rear:
15-degrees rather than the standard 35-degree angle. The 50-ton capacity
50CC/RP offers a deck width of eight-feet, six-inches and a low deck height
of 20 inches.

Features a four-main-beam design and T1, 100,000-PSI minimum yield steel construction.

Designed for ease of operation, loading and unloading, the 50CC/RP
Hybrid is a non-ground bearing hydraulic gooseneck trailer. Air ride
suspension provides a smoother ride, while Talbert’s +3/-3 control
system allows fast and easy height adjustment of the lower and back end.

The50CC/RP is four-axle capable, offering even greater versatility. It
features three axles with fourth axle pin-on configuration. Axle capacity
is 25,000 pounds each. To accommodate varying state laws, the trailer
offers a dual kingpin setting of 108 and 90.

Built for strength and reliability, the 50CC/RP features a four-main-beam
design and T1, 100,000-PSI minimum yield steel construction. The loading
ramp is wood-filled and double-hinged to provide strength and traction
needed for heavy equipment. To ensure a solid base for any load, Aptiong
flooring offers proven performance and durability. Other standard
features include rear-loading fenders, LED lights, strobes and battery
backup.

Related links
Talbert Manufacturing