Surface preparation and finishing
Angled for efficiency
April 28, 2009 – Yanmar Construction Equipment Division has introduced a new Angle Blade as a factory installed option for the ViO55-5.
|Yanmar’s new Angle Blade comes as a factory installed |
option for the ViO55-5.
April 28, 2009 – Yanmar Construction Equipment Division has introduced a new Angle Blade as a factory installed option for the ViO55-5. In traditional Yanmar fashion, the new angle blade is designed with long term reliability in mind.
The company says it has leapfrogged the current industry angle blade technology with the addition of optional moldboard extensions which do several things to increase operator productivity such as extending the width of the blade so the tracks of the machine do not immediately run over the dirt spoils. When filling a trench, they allow the excavator tracks to be further away from the trench wall which can help prevent the trench wall from caving in which could cause a rollover.
The blade with moldboard extensions extend at least to the edge of the track so the blade will scrape up next to a wall or jobsite obstruction without the tracks rubbing against the wall. The extensions outside edges are angled to efficiently work right up next to a wall or jobsite obstruction.
The angle blade operation lever also has a float position with detent so the operator can choose between operating the blade in float or with fixed position.
Unlike most angle blades on compact excavators, the Yanmar Angle Blade can simultaneously be angled and raised or lowered which allows the operator the ability to constantly fine tune the gradeability.