Argo introduces two new entry-level models

These two new models, priced as entry-level vehicles for new ARGO owners, complete ODG’s transition from carbureted engines to EFI engines for its complete range of ARGO extreme terrain vehicles.

ODG Product Manager Tom Polanic explains that EFI engines in these new models translate into more fun for hunting and fishing enthusiasts, as well as fast response times for off-road emergency and rescue crews. “With traditional carburetion, engine performance starts to degrade above altitudes of 5,000 ft. Thanks to the automatic adjustment of the air fuel mixture, these Kohler engines will take you up to rivers and woodlands as high as 11,000 ft.

For first-responders in remote areas, the switch to EFI means “instant power” when their ARGO is called into service in cold weather, even after long periods in storage. “You just turn the key and go, every time,” says Polanic. “There’s no choke to fiddle with, no warm-up time, even when the temperature’s at -30oC. There’s no risk of flooding the engine, so it’s easier for new operators to get moving quickly. In snow rescues and mountain searches, seconds count – and these new Frontier models can save minutes.”

Apart from their practical advantages, according to Polanic, the 6×6 EFI and 8×8 EFI models are simply more fun to ride. The 6×6 Frontier EFI comes standard with Kohler’s air-cooled 19 hp Command Pro engine, while the 8×8 Frontier EFI steps up to the Kohler 23 hp Command Pro engine. Both engines have a higher cubic displacement for their horsepower rating, compared to previous carbureted engines. The result is a noticeable increase in throttle response along with more torque to help the vehicle scramble through broken terrain or dense woods.

New ARGO owners will also appreciate the lower operating costs that come with EFI engines. Fuel efficiency is better than previous carbureted engines, saving money and extending the range that the ARGOs can travel without refueling. The air-cooled engines also eliminate numerous service tasks from ARGO maintenance, with no radiator, pump or pulleys to clean, replace or manage.

The 6×6 Frontier EFI offers the option to run with the same 23 hp engine as the 8×8 model. It has a load capacity of up to 700 lb. (317 kg) on land, with a towing capacity of 1,200 lb. (545 kg), and capacity of 500 lb. (227 kg) on water. The 6×6 can transport 4 passengers on land or 2 on water.

The 6×6 750 HDi is the top of the line 6×6 model. It is powered by the same 23 hp Kohler Command Pro and coupled with the ADMIRAL transmission. When equipped with the ADMIRAL transmission in low gear, it performs similar to other 6×6 models: tight-turning, agile and responsive. In high gear, the vehicle performs similar to other side by sides on the market. Power loss is kept to a minimum allowing for smooth sweeping turns while trail riding. This benefit allows users to power through turns and immerse themselves in the thrill of off-road driving.

The 8×8 Frontier EFI can carry loads up to 1,000 lb. (454 kg) on land or 900 lb. (408 kg) on water and will tow up to 1,400 lb. (635 kg). It provides seating to transport up to 6 passengers on land and 4 on water.

For more information
www.argoutv.com